Almost three-quarters (71%) of all new container ships, which emit around a quarter of global ship CO2 emissions, already comply with the post-2025 requirements of the IMO’s Energy Efficiency Design Index (EEDI), according to a new study issued by Transport and Environment.
Additionally, the best 10% of new containerships are already almost twice as efficient as the requirement for 10 years time.
Faig Abbasov, shipping officer at T&E, said: “This new analysis using official IMO data confirms earlier findings presented to the IMO by environmental groups: the energy efficiency standard is not fit for purpose to drive better designs or technological innovation. Ship owners, represented by the ICS and BIMCO, have opposed tighter standards as part of efforts to drain all ambition out of IMO discussions on how shipping can decarbonise. Strengthening the EEDI is the lowest of low hanging fruit. If the IMO can’t take timely action on this issue because of industry opposition, how can it be expected to deliver an adequate response to the Paris Agreement?”
The shipping sector as whole is one of the fastest growing sources of CO2 and could be responsible for more than 17% of global emissions by 2050 if no action is taken. Despite this, the International Chamber of Shipping (ICS) and BIMCO are claiming that the sector cannot accept any “commitment or intention to place a binding cap on either the international shipping sector’s total CO2 emissions or the CO2 emissions of individual ships”. ICS has argued that a lack of zero/low carbon technologies is the main obstacle. Yet less than 1% of the 2,500 new ships analysed in this study reported using even innovative energy efficiency technologies already available.
The study analysed ship types accounting for two-thirds of ship CO2 emissions and found that in addition to container ships, 69% of general cargo ships, 26% of new tankers and 13% of gas carriers exceed the EEDI’s 2025 requirements 10 years ahead of schedule. In general, the 10% best performing general cargo ships, tankers and gas carriers are respectively 57%, 35% and 42% more efficient than was required by the EEDI in the period 2013-2015. CSC believes that the performance of the best ships in the fleet would be a good place to start when revising existing or setting new EEDI requirements.
John Maggs, president of the CSC, said: “The EEDI’s current efficiency requirements are so weak that there is no incentive for the uptake of currently available innovative technologies, let alone the development of new technologies. Industry says it can only reduce its climate impact when low carbon technologies are available, but resists policies that will incentivise their development and deployment. You can’t have your cake and eat it. Something has to give.”
Given that no bulk carrier has reported the use innovative electrical and/or mechanical energy saving technologies, there is considerable scope for further improvement in this category of ships. This also applies to all major ship types, of which only 9% of containerships have reported the use of innovative technologies.
Therefore, in order to incentivise development and deployment of further energy saving technologies and innovative ship designs, the revision of existing and setting of future design standards should be based on the performance of the 10% best ships in the market, the report concludes.
Further details may be found by reading the full report:
