Challenges faced and Lessons to be learned
Confidential Hazardous Incident Reporting Programme (CHIRP) has received a report related tocrankshaft bearing failures.
Report text:
My pet hate is crankshaft bearing failures. The connecting rod bottom end bearing is the one most prone to failure and since the very beginning of the diesel engine, it has been possible to measure the temperature of the oil coming out of the bearing, and detect a temperature rise in the event of a bearing problem. Crankshaft bearing failures remain the most common category of insurance claim, and yet this technology is still not a requirement. There is a requirement for an Oil Mist Detector on some engines, but by the time there has been an overheating bearing sufficient to create an oil mist, the damage has been done.
Again, such an improvement is just a matter of a few lines of writing within SOLAS or Class rules, it is basic technology that has existed for years.
CHIRP Comment
Initially the Maritime Advisory Board were not certain this report fell within the scope of the Programme, so an open letter inviting opinions was written to the membership of IMarEST.
Two views emerged; one related to the immediate safety risk to personnel close to a bearing and crankshaft failure, which was generally considered to be slight and another related to the safety risk associated with the impact of a bearing and crankshaft failure on the operational viability of the ship, which, in certain circumstances, could be significant.
On the balance of responses, the issue is considered to be one of safety, falling within the ISM Code.
Source:CHIRP
