IMCA has reported a high potential dropped object near miss incident. The incident occurred in a workshop location ashore. A section of metal panelling, which weighed 5.6kg, came loose from the hood of a large industrial automatic rolling door and fell 7-10 meters to the ground. It landed right in front of the fire exit of the workshop.
The Dropped Objects Preventions Scheme (DROPS) calculator tells us that an object of that weight falling from
that height could have resulted in a potential fatality.
Causal factors:
- Fastening brackets were rusted; this rusting was caused by water ingress;
- There was no secondary retention fitted – a practice advocated by DROPS;
- Whilst the rolling door itself was subject to planned maintenance and inspection, the system did not extend to the hood above the door, which had not been inspected since its installation approximately 15 years before;
- No dropped objects survey had taken place, which could have identified the actions required to ensure the safety of the item.
The root cause of the incident was found to be failure to identify the requirements to ensure the safety of this large automatic rolling door – including maintenance, inspection and secondary retention.
Actions Taken:
- Fallen panel was replaced and appropriate secondary retention (self-tapping screws) installed;
- The remaining panels were all examined and self-tapping screws were fitted as secondary retention;
- A preliminary dropped object survey was carried out, and annual checks on the hood panel were introduced
Source & Image credit: IMCA Safety Flash
