Dick Farrel Camoying, Assistant Vice President, Technical Manager, Skuld Club, focuses on purifiers, saying that they are one of the most important pieces of auxiliary machinery.
According to Mr. Camoying, purifiers’ main purpose is to separate water and other contaminants in the oil mixture using the principle of density difference.
Good maintenance of purifiers is important for smooth and accurate operation of the units. Some factors that influence a good working purifier are temperature, feed rate, the type of gravity disc, and oil density
To maintain optimal efficiency of the equipment, Mr. Camoying suggests that filters and heaters should be regularly cleaned and opened as per the vessel’s planned maintenance system or manufacturers’ recommendations.
Frequent cleaning should take place if the fuel quality is poor, and fuel tanks should be cleaned as per scheduled intervals, to avoid high concentrations of sediments and cat fines. “The vessel should also have adequate spare parts onboard for maintenance of the purifiers.”
We have seen cases where the parameters regarding for example water and aluminium plus silicon are near the maximum limit. By having good working purifiers and good fuel handling management and treatment onboard, the values will reduce to acceptable levels
Concluding, Mr. Camoying noted that it is important not to bypass the fuel filtering equipment as it could damage the main and auxiliary engines.
On the other hand, it is recommended to run the purifiers in parallel with a minimum feed rate and to maintain the correct fuel oil inlet temperature at an optimal level.
It is important to ensure that the correct gravity disc is used and to have regular fuel system checks, and for fuel samples to be sent to accredited fuel laboratories
Skuld Club highlighted.
